Last updated on 2025-04-04 05:53:16 CEST.
| Flavor | Version | Tinstall | Tcheck | Ttotal | Status | Flags |
|---|---|---|---|---|---|---|
| r-devel-linux-x86_64-debian-gcc | 1.0.0 | 3.38 | 147.77 | 151.15 | ERROR | |
| r-devel-linux-x86_64-fedora-clang | 1.0.0 | 431.47 | OK | |||
| r-devel-linux-x86_64-fedora-gcc | 1.0.0 | 463.01 | OK | |||
| r-devel-windows-x86_64 | 1.0.0 | 14.00 | 310.00 | 324.00 | OK | |
| r-release-linux-x86_64 | 1.0.0 | 3.93 | 223.10 | 227.03 | ERROR | |
| r-release-windows-x86_64 | 1.0.0 | 15.00 | 308.00 | 323.00 | NOTE | |
| r-oldrel-windows-x86_64 | 1.0.0 | 13.00 | 314.00 | 327.00 | NOTE |
Version: 1.0.0
Check: tests
Result: ERROR
Running ‘testthat.R’ [123s/143s]
Running the tests in ‘tests/testthat.R’ failed.
Complete output:
> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/testing-design.html#sec-tests-files-overview
> # * https://testthat.r-lib.org/articles/special-files.html
>
> library(testthat)
> library(GENEAcore)
>
> test_check("GENEAcore")
Processing file 1/1 : 10Hz_calibration_file.bin
[1] "File read time: 0.07 seconds"
[1] "MPI creation time: 0.01 seconds"
[1] "Non-movement detection time: 0.43 seconds"
[1] "Auto-calibration calculation time: 0.7 seconds"
[1] "Transitions detection time: 2.32 seconds"
Processing Day 1 of 2
Start_index: 0 End_index: 287990
[1] "Reading 287990 rows of raw data time: 1.17 seconds"
[1] "Apply calibration time: 0.07 seconds"
[1] "Apply calculations time: 0.93 seconds"
[1] "Epoch creation time: 6.39 seconds"
[1] "Epoch steps calculation time: 39.49 seconds"
[1] "Event creation time: 0.46 seconds"
[1] "Event steps calculation time: 2.85 seconds"
Processing Day 2 of 2
Start_index: 287990 End_index: 503990
[1] "Reading 216000 rows of raw data time: 0.83 seconds"
[1] "Apply calibration time: 0.04 seconds"
[1] "Apply calculations time: 0.52 seconds"
[1] "Epoch creation time: 4.75 seconds"
[1] "Epoch steps calculation time: 54.44 seconds"
[1] "Event creation time: 0.34 seconds"
[1] "Event steps calculation time: 2.04 seconds"
[1] "Total epoch/event creation time: 115.99 seconds"
[ FAIL 4 | WARN 4 | SKIP 0 | PASS 30 ]
══ Failed tests ════════════════════════════════════════════════════════════════
── Error ('test-MPI_calibrate.R:136:3'): (code run outside of `test_that()`) ───
Error in `gzfile(file, mode)`: cannot open the connection
Backtrace:
▆
1. └─base::eval(...)
2. └─base::eval(...)
3. └─GENEAcore::create_MPI(binfile, binfile_path, output_folder) at test-MPI_calibrate.R:136:3
4. └─base::saveRDS(...)
5. └─base::gzfile(file, mode)
── Error ('test-MPI_create.R:23:3'): (code run outside of `test_that()`) ───────
Error in `gzfile(file, mode)`: cannot open the connection
Backtrace:
▆
1. └─base::eval(...)
2. └─base::eval(...)
3. └─GENEAcore::create_MPI(binfile_10Hz, binfile_name, output_folder) at test-MPI_create.R:23:3
4. └─base::saveRDS(...)
5. └─base::gzfile(file, mode)
── Error ('test-sample_binfile.R:26:3'): (code run outside of `test_that()`) ───
Error in `gzfile(file, mode)`: cannot open the connection
Backtrace:
▆
1. └─base::eval(...)
2. └─base::eval(...)
3. └─GENEAcore::sample_binfile(binfile, binfile_path, output_folder) at test-sample_binfile.R:26:3
4. └─GENEAcore::create_MPI(binfile, binfile_path, output_folder)
5. └─base::saveRDS(...)
6. └─base::gzfile(file, mode)
── Error ('test-step_counter.R:14:3'): (code run outside of `test_that()`) ─────
Error in `gzfile(file, mode)`: cannot open the connection
Backtrace:
▆
1. └─base::eval(...)
2. └─base::eval(...)
3. └─GENEAcore::create_MPI(binfile_50, binfile_path_50, output_folder) at test-step_counter.R:14:3
4. └─base::saveRDS(...)
5. └─base::gzfile(file, mode)
[ FAIL 4 | WARN 4 | SKIP 0 | PASS 30 ]
Error: Test failures
Execution halted
Flavor: r-devel-linux-x86_64-debian-gcc
Version: 1.0.0
Check: tests
Result: ERROR
Running ‘testthat.R’ [192s/269s]
Running the tests in ‘tests/testthat.R’ failed.
Complete output:
> # This file is part of the standard setup for testthat.
> # It is recommended that you do not modify it.
> #
> # Where should you do additional test configuration?
> # Learn more about the roles of various files in:
> # * https://r-pkgs.org/testing-design.html#sec-tests-files-overview
> # * https://testthat.r-lib.org/articles/special-files.html
>
> library(testthat)
> library(GENEAcore)
>
> test_check("GENEAcore")
Processing file 1/1 : 10Hz_calibration_file.bin
[1] "File read time: 0.09 seconds"
[1] "MPI creation time: 0.01 seconds"
[1] "Non-movement detection time: 0.64 seconds"
[1] "Auto-calibration calculation time: 0.78 seconds"
[1] "Transitions detection time: 3.22 seconds"
Processing Day 1 of 2
Start_index: 0 End_index: 287990
[1] "Reading 287990 rows of raw data time: 1.65 seconds"
[1] "Apply calibration time: 0.19 seconds"
[1] "Apply calculations time: 1.28 seconds"
[1] "Epoch creation time: 10.71 seconds"
[1] "Epoch steps calculation time: 62.13 seconds"
[1] "Event creation time: 0.59 seconds"
[1] "Event steps calculation time: 4.18 seconds"
Processing Day 2 of 2
Start_index: 287990 End_index: 503990
[1] "Reading 216000 rows of raw data time: 1.18 seconds"
[1] "Apply calibration time: 0.06 seconds"
[1] "Apply calculations time: 0.79 seconds"
[1] "Epoch creation time: 8.07 seconds"
[1] "Epoch steps calculation time: 86.66 seconds"
[1] "Event creation time: 0.53 seconds"
[1] "Event steps calculation time: 3.12 seconds"
[1] "Total epoch/event creation time: 182.76 seconds"
[ FAIL 4 | WARN 4 | SKIP 0 | PASS 30 ]
══ Failed tests ════════════════════════════════════════════════════════════════
── Error ('test-MPI_calibrate.R:136:3'): (code run outside of `test_that()`) ───
Error in `gzfile(file, mode)`: cannot open the connection
Backtrace:
▆
1. └─base::eval(...)
2. └─base::eval(...)
3. └─GENEAcore::create_MPI(binfile, binfile_path, output_folder) at test-MPI_calibrate.R:136:3
4. └─base::saveRDS(...)
5. └─base::gzfile(file, mode)
── Error ('test-MPI_create.R:23:3'): (code run outside of `test_that()`) ───────
Error in `gzfile(file, mode)`: cannot open the connection
Backtrace:
▆
1. └─base::eval(...)
2. └─base::eval(...)
3. └─GENEAcore::create_MPI(binfile_10Hz, binfile_name, output_folder) at test-MPI_create.R:23:3
4. └─base::saveRDS(...)
5. └─base::gzfile(file, mode)
── Error ('test-sample_binfile.R:26:3'): (code run outside of `test_that()`) ───
Error in `gzfile(file, mode)`: cannot open the connection
Backtrace:
▆
1. └─base::eval(...)
2. └─base::eval(...)
3. └─GENEAcore::sample_binfile(binfile, binfile_path, output_folder) at test-sample_binfile.R:26:3
4. └─GENEAcore::create_MPI(binfile, binfile_path, output_folder)
5. └─base::saveRDS(...)
6. └─base::gzfile(file, mode)
── Error ('test-step_counter.R:14:3'): (code run outside of `test_that()`) ─────
Error in `gzfile(file, mode)`: cannot open the connection
Backtrace:
▆
1. └─base::eval(...)
2. └─base::eval(...)
3. └─GENEAcore::create_MPI(binfile_50, binfile_path_50, output_folder) at test-step_counter.R:14:3
4. └─base::saveRDS(...)
5. └─base::gzfile(file, mode)
[ FAIL 4 | WARN 4 | SKIP 0 | PASS 30 ]
Error: Test failures
Execution halted
Flavor: r-release-linux-x86_64
Version: 1.0.0
Check: installed package size
Result: NOTE
installed size is 9.4Mb
sub-directories of 1Mb or more:
doc 1.1Mb
extdata 8.2Mb
Flavors: r-release-windows-x86_64, r-oldrel-windows-x86_64