CRAN Task View: Processing and Analysis of Tracking Data

This CRAN Task View (CTV) contains a list of packages useful for the processing and analysis of tracking data. If you just want to see what is new in this version of the CTV, click here. See below how to cite the Tracking CTV.

Movement of an object (both living organisms and inanimate objects) is defined as a change in its geographic location in time, so movement data can be defined by a space and a time component. Tracking data are composed by at least 2-dimensional spatial coordinates (x,y) and a time index (t), and can be seen as the geometric representation (the trajectory) of an object’s path. The packages listed here, henceforth called tracking packages, are those explicitly developed to either create, transform or analyze tracking data (i.e. (x,y,t)), allowing a full workflow from raw data from tracking devices to final analytical outcome. In other words, a tracking package must have one or several functions that have tracking data as input or output. For instance, a package that would use accelerometer, gyroscope and magnetometer data to reconstruct an objects’s trajectory—most likely an animal’s trajectory—via dead-reckoning, thus transforming those data into an (x,y,t) format, would fit into the definition. However, a package analyzing accelerometry series to detect changes in behavior would not fit (note that there is a dedicated section at the end of this CTV for packages that deal with movement but not tracking data per se). See more on this in Joo et al. (2020).

Regarding (x,y), some packages may assume 2-D Euclidean (Cartesian) coordinates, and others may assume geographic (longitude/latitude) coordinates. We encourage the users to verify how coordinates are processed in the packages, as the consequences can be important in terms of spatial attributes (e.g. distance, speed and angles).

Besides these packages, many other packages contain functions for data processing and analysis that could eventually be used for tracking data or second/third degree variables obtained from tracking data; we encourage users to check other CRAN Task Views like SpatioTemporal, Spatial and TimeSeries.

This CTV was inspired on the review of tracking packages by Joo et al. (2020), as an attempt to continuously update the list of packages already described in the review. Therefore, the CTV takes a similar structure as the review:

We welcome and encourage contributions to add packages at any time. To submit a new package, please open an issue on the GitHub repository following this link.

Table of contents

• Pre-processing
• Post-processing
• Analysis
  • Visualization
  • Track description
  • Path reconstruction
  • Behavioral pattern identification
  • Space and habitat use characterization
  • Trajectory simulation
  • Others analyses of tracking data
• Dealing with movement but not tracking data
• Technical notes
• Citing and acknowledgments
• Related links

Pre-processing

Pre-processing is required when raw data are not in a tracking data format. The methods used for pre-processing depend heavily on the type of biologging device used. Among the tracking packages, some of them are focused on GLS (global location sensor), others on radio telemetry, accelerometry, magnetometry, or GTFS (General Transit Feed Specification) data.

• GLS data pre-processing: Several methodologies have been developed to reduce errors in geographic locations generated from the light data, which is reflected by the large number of packages for pre-processing GLS data. We classified these methods in three categories: threshold, curve-fitting and twilight-free (no package currently included):
  • Threshold methods: Threshold levels of solar irradiance, which are arbitrarily chosen, are used to identify the timing of sunrise and sunset. The package that uses threshold methods is SGAT.
  • Curve-fitting methods: The observed light irradiance levels for each twilight are modeled as a function of theoretical light levels (i.e. the template). Then, parameters from the model (e.g. a slope in a linear regression) are used to estimate the locations. The formulation of the model and the parameters used for location estimation vary from method to method. The packages that use curve-fitting methods are FLightR, tripEstimation and SGAT.
• Dead-reckoning using accelerometry and magnetometry data: The combined use of magnetometer and accelerometer data, and optionally gyroscopes and speed sensors, allows to reconstruct sub-second fine scale movement paths using the dead-reckoning (DR) technique.
  TrackReconstruction implement DR to obtain tracks, based on different methods.
• GTFS data pre-processing: Public transportation data in GTFS format per trip and vehicle can be interpolated in space-time to obtain GPS-like records with gtfs2gps.
• Eye tracking data pre-processing: Plain-text ASC data files from Eyelink eye trackers are imported and transformed into (x,y,t) tracking data with eyelinker.

Post-processing

Post-processing of tracking data comprises data cleaning (e.g. identification of outliers or errors), compressing (i.e. reducing data resolution which is sometimes called resampling) and computation of metrics based on tracking data, which are useful for posterior analyses.

• Data cleaning: argosfilter and SDLfilter implement functions to filter implausible platform terminal transmitter (PTT) locations. SDLfilter is also adapted to GPS data. track2KBA allows splitting tracks into trips for central-place foraging species. Other packages with functions for cleaning tracking data are TrajDataMining (archived) and trip.
• Data compression: Rediscretization or getting data to equal step lengths can be achieved with adehabitatLT, mousetrap, trajectories or trajr. Regular time-step interpolation can be performed using adehabitatLT, amt, mousetrap or trajectories. Other compression methods include Douglas-Peucker (TrajDataMining (archived) and trajectories), opening window (TrajDataMining (archived)) or Savitzky-Golay (trajr).
• Computation of metrics: Some packages automatically derive second or third order movement variables (e.g. distance and angles between consecutive fixes) when transforming the tracking data into the package’s data class. These packages are adehabitatLT, momentuHMM, moveHMM and trajectories. bcpa has a function to compute speeds, step lengths, orientations and other attributes from a track. amt, move, segclust2d, sftrack, trajr and trip also contain functions for computing those metrics, but the user needs to specify which ones they need to compute.

Analysis

Visualization

The packages mainly developed for visualization purposes, and more specifically, animation of tracks, are anipaths and moveVis (archived).

Track description

amt, rpkg("mousetrap"), trajr, and track2KBA compute summary metrics of tracks, such as total distance covered, straightness index, sinuosity, trip duration, or others (depending on the package). trackeR was created to analyze running, cycling and swimming data from GPS-tracking devices for humans. trackeR computes metrics summarizing movement effort during each track (or workout effort per session). sftrack defines two classes of objects from tracking data, tracks (sf points in a time sequence) and trajectories (sf linestrings in a time sequence) and provides functions to summarize both showing starting and ending time, number of points, and total distance covered. cylcop can fit multivariate distributions using the method of copulae that allows for correlated step lengths and turn angles; these distributions can later be used for step-selection modeling.

Path reconstruction

Whether it is for the purposes of correcting for sampling errors, or obtaining finer data resolutions or regular time steps, path reconstruction is a common goal in movement analysis. Packages available for path reconstruction are adehabitatLT, bsam, crawl, ctmm, ctmcmove, mousetrap and TrackReconstruction.

Behavioral pattern identification

Another common goal in movement ecology is to get a proxy of the individual’s behavior through the observed movement patterns, based on either the locations themselves or second/third order variables such as distance, speed or turning angles. Covariates, mainly related to the environment, are frequently used for behavioral pattern identification.

We classify the methods in this section as: 1) non-sequential classification or clustering techniques, 2) segmentation methods and 3) hidden Markov models.

• Non-sequential classification or clustering techniques: Here each fix in the track is classified as a given type of behavior, independently of the classification of the preceding or following fixes (i.e. independently of the temporal sequence). The packages implementing these techniques are EMbC, m2b and gazepath (archived). The latter is for eye tracking data only, classifying it into saccades and fixations.
• Segmentation methods: They identify change in behavior in time series of movement patterns to cut them into several segments. The packages implementing these techniques are adehabitatLT, bcpa, bayesmove, segclust2d and marcher.
• Hidden Markov models: They are centered upon a hidden state Markovian process (representing the sequence of non-observed behaviors) that conditions the observed movement patterns. The packages implementing these methods are bsam, moveHMM and momentuHMM.

Space and habitat use characterization

Multiple packages implement functions to help answer questions related to where individuals spend their time and what role environmental conditions play in movement or space-use decisions, which are typically split into two categories: home range calculation and habitat selection.

• Home ranges: Several packages allow the estimation of home ranges, such as adehabitatHR, amt, ctmm, move, and track2KBA. They provide a variety of methods, from simple Minimum convex polygons to more complex probabilistic Utilization distributions, potentially accounting for the temporal autocorrelation in tracking data.
• Habitat use: Several packages estimate the role of habitat features on animal space use or habitat selection, such as amt using step selection functions and ctmcmove using functional movement modeling,.
• Non-conventional approaches for space use: Other non-conventional approaches for investigating space use from tracking data can be found in recurse.

Trajectory simulation

Tracking packages implementing trajectory simulation are mainly based on Hidden Markov models, correlated random walks, Brownian motions, Lévy walks or Ornstein-Uhlenbeck processes: adehabitatLT, bsam, crawl, ctmm, momentuHMM, moveHMM, smam, SiMRiv and trajr.

Other analyses of tracking data

• Interactions: Interactions between individuals can be assessed using metrics from wildlifeDI and TrajDataMining (archived). spatsoc groups relocations within a same time-period or a same spatial range, and allows computing distances between individuals in the group and identifying nearest neighbors.
• Movement similarity: Measures such as the longest common subsequence, Fréchet distance, edit distance and dynamic time warping could be computed with SimilarityMeasures or trajectories. mousetrap includes functions to cluster trajectories.
• Population size: caribou was specifically created to estimate population size from Caribou tracking data, but can also be used for wildlife populations with similar home-range behavior.
• Environmental conditions: moveWindSpeed uses tracking data to infer wind speed. rerddapXtracto allows extracting environmental data served on any ERDDAP server along a given track.

Dealing with movement but not tracking data

• Analysis of biologging data: Packages to analyze time-depth recorder (TDR) and accelerometer data from animals is diveMove. It allows obtaining statistics of dive effort. Several packages focus on the analysis of human accelerometry data, mainly to describe periodicity and levels of activity: acc, accelerometry, GGIR, nparACT, pawacc and PhysicalActivity.
• Non-biologging data: When a camera can encompass an area large enough for an individual to move in, video and images can be used to record movement. A package related to these data is trackdem (for processing frame-by-frame images). Another example of a non-biologging but movement package is actel which deals with data from acoustic telemetry stations. It allows exploring time spend in each array, getting time series of transitions between arrays, among others. migflow, on the other hand, allows using a series of distances traveled and positions (lon, lat) of sites to calculate the maximum flow of animals through a migratory network.

Technical notes

The packages included in the Tracking CTV are mainly from CRAN and a few of them are from other repositories. Upon submission, packages from CRAN and Bioconductor are automatically accepted in the Tracking CTV if they fit the scope (see above), as they already passed tests from R CMD check. Packages that are not from CRAN/Bioconductor are only included after they are tested and pass the check tests (more details here).

Once in a while, maintainers of the Tracking CTV release a checked version, which is a major update the CTV, with full tests run on every non-CRAN/non-Bioconductor packages. Packages that fail the tests are also removed on this occasion

Core packages are defined as the group of tracking packages with the highest number of mentions (Depends, Imports, Suggests) from other tracking packages; the cutpoint is estimated using the maxstat_test function in the coin package.

Last checked version on: 2023-05-20

Citing and acknowledgments

If you would like to cite this CTV, we suggest mentioning: maintainers, year, title of the CTV, version, and URL. For instance:

Joo and Basille (2023) CRAN Task View: Processing and Analysis of Tracking Data. Version 2023-06-19). URL: https://CRAN.R-project.org/view=Tracking

Besides the maintainers, the following people contributed to the creation of this task view: Achim Zeileis, Edzer Pebesma, Michael Sumner, Matthew E. Boone (former CTV maintainer).

Early work resulting in the article at the base of this Task View, and thus the initial list of Tracking packages, was partially funded by a Human Frontier Science Program Young Investigator Grant (SeabirdSound - RGY0072/2017; R. Joo and M. Basille).

Related links

• Article at the base of this Task View
• GitHub repository for this Task View

CRAN packages

Other resources

• CRAN Task View: Spatial
• CRAN Task View: SpatioTemporal
• CRAN Task View: TimeSeries
• GitHub Project: migflow
• GitHub Project: SGAT